Original RIEPE®
Chemical Products for spraying systems
1. RELEASE AGENT LP113/03®
Area of application:
Machine infeed
Container (litre):
30 | 200 | 1000
Colour:
Transparent
Apply to the corner area of the already applied longitudinal edge
• Prevents the adhesion of emerging glue residue (cross gluing process) in the corner area
2. RELEASE AGENT LPZ/II®
Area of application:
Prior to the pre-milling
Container (litre):
30 | 200 | 1000
Colour:
Transparent
Spray onto the upper and lower edge area of the workpiece
• Prevents the adhesion of emerging glue onto the workpiece
3. RELEASE AGENT TH97®
High heat resistant: for use on machines with high heat zones (e.g. Post-/Softforming)
• Workpieces can pass through high heat zones without any effect on the performance of the release agent
• Prevents the adhesion of emerging glue residue onto the workpiece
4. RELEASE AGENT NFLY®
Areas of application:
(a) Pressure roller
(b) Edgeband/ protective foil
(c) Slide shoe
(d) DUO scraper
(e) Tooling
Containers (litre):
30 | 200 | 1000 | Aerosol
Colour:
Green
(a) Intermittent application to the pressure roller
• Glue residues cannot adhere to the roller
(b) Spray directly onto the surface of the edgeband
• Avoidance of marking and damage
• Protective film is protected and not removed from the edge
• Avoidance of marking and damage
• Protective film is protected and not removed from the edge
(c) Edge/protective foil automatically transfers the release agent to the slide shoes
• Glue residues do not adhere • Prevents marking and friction
• Glue residues do not adhere • Prevents marking and friction
(d) Direct application onto the DUO scraper
• No clogging of the DUO scraper
(e) Application to the tooling
• Prevents fouling of the trimmers
• Prevents fouling of the trimmers
5. RELEASE AGENT LP120/12®
Area of application:
Pressure roller
(Hot air / Laser machines)
Container (litre):
30 | 200 | 1000
Colour:
Transparent
Intermittent application to the pressure roller
• Use within high heat zones possible
• Contamination of the roller is prevented
• Verhindert Markierungen und Reibung
6. ANTISTATIC-COOLANT LP289/99®
Area of application:
After pressure zone
Container (litre):
30 | 200 | 1000
Colour:
Blue
Spray onto the upper and lower edge area of the workpiece
• Statically discharges the edge area
• Cooling of the glue joint and hardening of the glue
• Tracers and workpieces remain free of chippings
• Tooling remains free of glue residue
7. COOLANT WZG 12®
Area of application:
After pressure zone
Container (litre):
30 | 200 | 1000
Colour:
Blue
Spray onto the upper and lower edge area of the workpiece
• prevents cracking of acrylic edges (lesser cooling effect)
• Static discharging of the workpiece
• Cooling of the glue joint and hardening of the glue
• Tracers and workpieces remain free of chippings
• Tooling remains free of glue residue
• Static discharging of the workpiece
• Cooling of the glue joint and hardening of the glue
• Tracers and workpieces remain free of chippings
• Tooling remains free of glue residue
Die RIEPE® Sprühsysteme arbeiten wartungsfrei nur mit diesen, dafür speziell entwickelten Flüssigkeiten!
8. CLEANING AGENT LP163/93®
Area of application:
Before buffing wheels / surface scraper
Container (litre):
30 | 200 | 1000
Colour:
Red
Spray onto the upper and lower edge area of the workpiece
• Removal of release agent and loose glue residue
• Cooling of the edgeband and glue joint
• Matt radius of the machined edgeband re-matches the surface finish
• Cooling of the edgeband and glue joint
• Matt radius of the machined edgeband re-matches the surface finish
WAX REMOVER LP175/11
Area of application:
After wax application unit
Container (litre):
30 | 200 | 1000
Colour:
Transparent
Spray onto the polished edge
• Removal of wax residue on machines with polishing systems
The RIEPE® spraying systems operate maintenance free only when used in conjunction with these specially developed liquids.